DC to DC Converter
1.Working principle
Bidirectional DC/DC converter is applied to new energy, which operates in cooperation with battery, battery, DC bus, motor controller and motor to realize various operation conditions of new energy, energy recovery and prolong the service life of battery.
2. Function introduction
Realize the two-way flow of energy, that is, it can charge from the battery side to the bus and charge the battery from the bus side
It has full-automatic protection functions such as overheating, overvoltage, overload and overcurrent
Original imported power devices shall be selected
The main control chip adopts microchip industrial MCU and full digital circuit design
All industrial chips are used, which can operate normally in cold, high temperature and humid environment.
Standard RS-232 communication, RS-485, GPRS, Ethernet and other communication modes can be selected to meet the needs of different occasions to the greatest extent
Model |
10-50K DC-DC(BIDCDC-10-50KW) |
Operation mode |
Continuous work |
Rated output power (KW) |
10-50 |
High voltage side parameters |
Max.power( KW) |
10-50 |
DC voltage range |
DC 50V-850V |
Current range |
0--±160A |
Voltage stabilizing accuracy |
<0.1%F.S. |
Current stabilizing accuracy |
<0.1%F.S. |
DC voltage ripple |
<0.3%F.S. |
Low voltage side parameters |
Max.power( KW) |
50 |
DC voltage range |
DC 0-800V |
Current range |
0--±200A |
Voltage stabilizing accuracy |
<0.1%F.S. |
Current stabilizing accuracy |
<0.1%F.S. |
DC voltage ripple |
<0.3%F.S.
|
Parallel No. |
20units |
System |
System power supply |
1. AC 220 V (required when the low voltage side voltage is lower than 180V) 2. The low voltage side voltage is between 180v-750v |
Noise |
65dB |
Protect Class |
IP21 |
Allowable ambient temperature |
-20ºC~+45ºC |
Cooling mode |
Forced air cooling |
Allowable relative humidity |
0~95% ( non-condensing ) |
Max. allowable altitude |
≤2000m(derating over 2000m ) |
Emergency stop |
Yes (via emergency stop button) |
Display and communication |
Display |
External touch screen |
Standard communication mode |
Ethernet / RS232 (Modbus Protocol) |
Size / weight |
Host size |
W*L*H 482.6mm*600mm*222.2mm |
1500kw and 3000kw bi-directional inverter
Bi-directional inverter can not only convert the DC power into AC power,but also can invert the AC power to DC power.Bi- directional inverter mainly control the battery's charging and discharging,at same time it is the core control equipment.Bi-directional inverter can apply in the grid ties power system which has the requirement of power storage function.The power storage system is for the the emerging load or important load charging.It can combine with the string inverter and then construct the separated PV power system.
AC60 series power supply is a power that change the electric supply into the required voltage and frequency through power converting circuit.Its main characteristic is to supply pure and stable sine wave power output,low harmonic distortion,high-stability frequency and regulation.It can impersonate many of the world of frequency voltage and output characteristics,and cover the whole industry needs,entirely consistent with the design engineer in research and production and testing of the product testing and life, and a simulated tests to a low, import equipment and the production of electricity and other applications.In addition, it will also support the air space and military equipment 400Hz.
on/off hybrid Solar inverter can not only feed-in power to grid,but also store PV power to the battery, and directly power loads .Combing the funcation of the solar on-grid inverter. MPPT solar charger/controller, and battery charger to offer uniterruptible power support .Its comprehensive LCD display offers user configureable and easy accessible button operation. Such as AC/solar charging piority, battery charging current, and accecptable input voltage beased on different appications.
1000kw Hydro/wind power grid inverter with DC voltage input
The main circuit adopts the DSP chip from the United States TI company, the Infineon IGBT modules, the Infineon protection driver,the part of on grid output adopts isolation transformer,safe and reliable.
- Using SPWM pulse width modulation technology, pure sine wave output, power factor close to 1.Current harmonic content is low.
- DC Maximum Power Point Tracking(MPPT)
- Inverter and network current closed-loop control, adjustable control
- Wide AC voltage input range, meet the needs of different occasions
- Perfect protection and complete self-detection and protection. When the system has malfunction, It will stop the on grid inverting
- Close circuit structure, the maximum efficiency> 95%
- Optional Ethernet, PC monitoring, remote data collection and surveillance
Adjustable Switching Afe Test Power Supply
AFE adopts Infineon as the core inverter and adopts full digital control. It has high control precision, fast response speed, high precision, high reliability, programmable features and automatic two-way operation function.
The function of the energy feedback unit is to feed back the regenerative energy generated in the process of motor speed regulation to the power grid, so as to avoid the energy loss caused by the resistance heating of the conventional energy consumption braking unit, so as to achieve considerable energy saving effect. The product is mainly for motor testing, access to the DC bus in the test platform, power to the inverter, and has two-way energy conversion function.
The altitude shall not exceed 2000m (more than 2000m, derating is required). No medium with explosion risk, no gas or conductive medium that corrodes metal and damages insulation, no water vapor and serious mold are allowed
30kVA Voltage and Frequency Stabilizer Three Phase
The power adopts advantaged SPWM IGBT high-frequency inverter technology, internal structure is AC-DC-AC, thoroughly eliminate the network interference, output wave forms are pure. It has the following features: wide range of constant-voltage and constant-frequency, high precision, light weight, small capacity, output transformer with apartheid, with the good with a high quality uninterrupted power supply system.
1.Input voltage:265~495V
2.Input frequency:30~70Hz
3.Output voltage:220V/380V±0.5%
4.Output frequency:50Hz±0.01%
5.Wave distortion:<1%
6. Isolation transformer output, safe and credible
7. Auto-protection and alarm for output over voltage, over current, overheat, short circuit
8. Efficiency reaches above 90%, widely applicable load, for nasty, capacitive resistance, any combination of the load
9. Dynamic quick, when load changes in 0 - 100%, stationary response time<0.1S
This series products adopt high frequency electronic switch changing technology,design and manufacture for air and military electrical equipment of 28.5V DC switch power,it a product instead of thyristor-controlled DC Source.
Application:
It can be used in aircraft and on-board equipment, radar, navigation and other electronic equipment military,and other needs 28.5V or 24V DC power supply field.And for all panzer and tanks, planes, guns, the power to start using.
Jinan Xinyuhua Energy Technology Co., Ltd. Firmly grasps the direction of "low-carbon economy and green development", takes "building a first-class new energy enterprise in China and even in the world" as its strategic goal, carries forward the enterprise spirit of "harmony, innovation and pursuit of excellence", strives to contribute clean energy, improve the power structure and fulfill social responsibility. A multi field, large-scale and powerful new energy leading enterprise constantly shows its unique charm and elegant demeanor. It will continue to serve the country with industry, repay the society with value, base on the market with reputation, and gallop into the future with strength, and advance hand in hand with all walks of life to create brilliance together!
The company is committed to the application of new energy industry in industrial, civil, military and other fields. Its products include solar system, wind turbine system, marine shore power supply system, DC power supply, rectifier, voltage and frequency stabilizer, military power supply, Jinan Xinyuhua Energy Technology Co., Ltd. Firmly grasps the direction of "low-carbon economy and green development", takes "building a first-class new energy enterprise in China and even in the world" as its strategic goal, carries forward the enterprise spirit of "harmony, innovation and pursuit of excellence", strives to contribute clean energy, improve the power structure and fulfill social responsibility. A multi field, large-scale and powerful new energy leading enterprise constantly shows its unique charm and elegant demeanor. It will continue to serve the country with industry, repay the society with value, base on the market with reputation, and gallop into the future with strength, and advance hand in hand with all walks of life to create brilliance together!
Our business marketing network covers Europe, North America and Asia Pacific, covering more than 50 countries, including Singapore, Indonesia, Philippines, Bangladesh, Germany, Italy, Belgium, the United States, Spain, Australia and other major markets. For each new member of Xinyuhua, new energy is not only a business opportunity in the sunshine, but also a way of life to create a green future. We uphold the concept of "sunshine quality, serving the world", and share with you the joy of the growth of green energy in the world under the sunshine!
Why Choose US?
• Professional team for after-sale service 7*24
• Experienced R & D team and profesional sales team
• OEM & ODM service, we will evaluate, design and produce your customized products
• Offer confidentiality agreement to protect your profit, with us your business will be in safe your money in safe.
Warranty:
As our customer, you enjoy the following services:
(1)One year repair for free of the complete machine;
(2)technical Support
(3) Within 24 hours for respond after receiving notification;
(4) Cost maintenance forever.
1 Q:Are you manufacturer?
We are a professional power supply manufacturer with high reputation in this field.
2.Q.Do you have certificates for your products?
Yes,we have CE, standard certifications.
3. Q:Can we print our logo?
We can print your logo on both power adapter and package.
4. Q: How is your production management and quality control system?
All our product process follows up ISO9001. Each process has technical instructors.The QC supervisors will regularly inspect the production. We will do products performance tests during production, and comprehensive quality tests when the products is completed.